AKO-59720

Widget

The box that summarises the information on each device is referred to as the "Widget".

The device sends the stored data to Akonet.cloud, as well as the alarms and alerts detected according to the configured transmission interval. When received, the widget for the corresponding device flashes for 1 minute indicating correct reception. During this time, the data shown correspond to the real-time measurement. After 1 minute, the operation averages are displayed again.

In the event of an alarm, the outline flashes red; if the alarm has been confirmed (muted) the outline is turned off.

Name assigned to the device
Device status
1. - Green: Active
  - Orange: Inactive
  - Red: Alarm on

A flashing red halo means that the alarm(s) has/have not been confirmed

Displays the value of external probe 1.
Percentage of time at setpoint
Displays the value of external probe 2.
Displays the value of external probe 3.
Total accumulated time of digital input active
Indicates if the digital input is activated.
Activation frequency of digital input
By moving the mouse over the indicator, it displays the date and time of the last synchronisation.
When red, it indicates whether there are any active alarms; if blank, there are no alarms.
By moving the mouse over the indicator, it displays the date and time of the last synchronisation. If a NBIoT connection is available, the signal strength is also displayed and the colour indicates the signal quality:
1. - Green: Good
  - Yellow: Satisfactory
  - Red: Low

Device detail

Shows the detail of each device as well as a summary of the data captured and allows adjusting the operating parameters.

Hide / Show Details

Shows / hides the device details.

Opens the synchronisation menu.
Signal strength.
Indicates battery status: A: OK; B: Replace as soon as possible. Moving the mouse over this will show the battery's voltage.
Indicates whether there are any active alarms; if blank, there are no alarms. Click to access alarm details.
By moving the mouse over the indicator, it displays the date and time of the last synchronisation and signal strength. The colour indicates the quality of the signal: C: Low; D: Satisfactory; E: Good
Displays the value of external probe 1.
Displays the value of external probe 2.
Displays the value of external probe 3.
Displays the status of the digital input.
Changes the time period selected, affects the summary of maximums, minimums and means (11) and exported data (12).
Displays a summary of the maximums, minimums and means for the data recorded in the selected period (10).
Exports saved data within the selected time frame (10).
Image can be customised.
Displays the device details, an image (customisable) and its location on the map.
Accesses the editing of device data.

Timeline

1: To add or remove a data source, click on it.

2: Displays the graph of the device operation log.

3: Moving the mouse over the graph, displays the detail of each point (time and data value).

4: Increases / decreases / moves the period of the graph

Period selection

Allows selecting the period displayed on the different graphs and also affects the calculation of the averages indicated in the widget shown on the left.

1: Quick acces to the periods: last day, last week, last month.

2: Start day of the period.

3: End day of the period. To select the period of just one day, double click on it.

4: click on refresh to validate the changes.

Graphs

Displays graphs of the data acquired by the device, there are 10 types of graphs:

(All) Inputs: Displays the values acquired continuously by all inputs:

1: Allows selecting from amongst the different grafhs available.

2: Moving the mouse over the graph shows the detail of each point (Date, time, and values).

3: By activating the checkbox the period of each graph can be customised.

4: Download the data from the graph in .csv, .pdf o .xls format.

(Digital) Timeline: Displays the activations of the digital input.

(Digital) Activity: Displays the accumulated, maximum, minimum and mean time for the digital input.

(Digital) Alarms: Displays the accumulated, maximum, minimum and mean time for alarms.

(Analogue) Continuous: Displays the continuous graph for each probe. The probe is selected using the drop-down menu.

(Analogue) Time At Setpoint: Displays the daily percentage of time during which the temperature was at the setpoint, above and below.

(Analogue) TTI Histogram: Breakdown of the different values obtained in percentage of time and their situation with regard to the setpoint.

(Analogue) Activity: Displays the daily mean, maximum and minimum temperature for each probe.

(Analogue) Alarms: Displays the number of alarm activations per probe.

(NB) Signal Strength: Displays the continuous NBIoT signal strength graph.

Page updated

Google Sites

Report abuse